Note Board
Hummeroid
wrote
Nov 23, 2009 at 20:27
Nov 23, 2009 at 20:27
Perfect, I should be able to come up with something. Also, shot from the backside?
Hummeroid
wrote
Nov 23, 2009 at 20:25
Nov 23, 2009 at 20:25
Oh, you have an adapter already? I need a pic preferably with the crank arm off.
Hummeroid
wrote
Nov 23, 2009 at 20:21
Nov 23, 2009 at 20:21
OK, PERFECT. Ok, so you buy an iscg adapter, and you mount it flipped around, so it moves the mounting surface inward. You have to grind the big center hole out to clear the bb, but it works GREAT. Did it on my old guide.
Hummeroid
wrote
Nov 23, 2009 at 20:17
Nov 23, 2009 at 20:17
Naw, I cant tell just from pics, Id need to fit everything... something sounds off though. OH! OHHH!
Terri, I know how to fix it.
Terri, I know how to fix it.
Hummeroid
wrote
Nov 23, 2009 at 20:14
Nov 23, 2009 at 20:14
I dont know what your local hack has it set up like lol Hopefully you can fit more!
Hummeroid
wrote
Nov 23, 2009 at 20:08
Nov 23, 2009 at 20:08
Ok, so whats preventing you from adding 2.5mm of crank spindle spacers?
Hummeroid
wrote
Nov 23, 2009 at 20:04
Nov 23, 2009 at 20:04
oh damn, skipped that part lol Ok, current setup has 2 bb spacers now on drive side? That including the guide as a spacer...
Hummeroid
wrote
Nov 23, 2009 at 19:49
Nov 23, 2009 at 19:49
Worst case run the ring on the outside of the arms, and use the guide shims/adjustment plates to shim the guide outward. Shouldnt be hard
Hummeroid
wrote
Nov 23, 2009 at 13:02
Nov 23, 2009 at 13:02
Give me current specs. It should work fine, your bike shop just seems to be a bunch of tards when it comes to crank setup....
Hummeroid
wrote
Nov 20, 2009 at 19:45
Nov 20, 2009 at 19:45
what from? you should be happy terri! Its friday? You get bb yet?
Hummeroid
wrote
Nov 17, 2009 at 20:11
Nov 17, 2009 at 20:11
I just realized how spendy they are lol, wel shall see if they have them though!
Hummeroid
wrote
Nov 17, 2009 at 19:28
Nov 17, 2009 at 19:28
AHa! HT is long on that? Looks like you have plenty of 40 stanchion above the top crown so I didnt figure it that tall

RSS
18 hours ago